A Tutorial for up-to-date, simple, and robust 16S analysis with QIIME

Note 2: This is 4 years old - much more up to date resources exist today, only preserving for legacy purposes.

Note: In the past 2+ years since I made this tutorial, the field has continued to change at the fast pace it always has. If you are doing 16s analysis, you should use QIIME2 instead of this QIIME1 tutorial and exact sequence variants instead of OTUs. I am preserving this tutorial because I think it is a good introduction to the same general pipeline for analysis of 16S data, but do not recommend following it exactly anymore because it is outdated. I also cannot seriously recommend the Greengenes database for environmental microbiology work: while the core structure of that database hasn't changed since 2013, an enormous number of novel bacterial phyla have been discovered and tens of thousands of bacterial genomes have been added to the databases since then. SILVA seems significantly better and should be the initial choice when doing 16S work, but is also missing a large number of novel bacterial genomes that are often highly abundant in many ecosystems (e.g., the extremely abundant Rokubacteria from soil and the Melainabacteria from soil and the human gut). It is difficult to understand why this is the case, but there isn't a 16S dataset that accurrately reflects what we know about microbial diversity for the time being.

Methods of 16S sequencing data analysis have evolved and changed rapidly over the past few years, making most available online tutorials for QIIME out of date with respect to either sequencing technology, QIIME syntax and scripts, or best practices in statistical analysis. On top of that, the sheer number of scripts and methods packaged with QIIME (or other microbial analysis pipelines!) might be overwhelming to someone new to the field. This page intends to be an accessible and straightforward introduction to how to analyze 16S sequencing data using statistically robust and current methods. I have attempted to base the format and structure of this in a question / hypothesis framework, so that each section is primarily concerned with how to find the answer to a particular question or hypothesis about the microbiota you are studying. Created in the DiRuggiero lab at Johns Hopkins

I will cover how to approach and answer the following hypotheses and questions:
1. Proportionally, what microbes are found in each sample community?
2. How many species are in each sample?
3. Are there species significantly more abundant in one set of samples than in another?
4. How much does diversity change between samples?
5. Do different sample groupings significantly differ in their microbial composition?
6. Which species abundances are significantly correlated with an environmental variable?
7. Do environmental differences between samples correlate with microbial composition?
8. How often are species found together, and in which samples are they found?

Links and Tools

QIIME Scripts
Phyloseq
Stability of operational taxonomic units: an important but neglected property for analyzing microbial diversity. He Y, Caporaso JG, Jiang XT, Sheng HF, Huse SM, Rideout JR, Edgar RC, Kopylova E et al. Microbiome 2015, 3:20 (20 May 2015)
McMurdie, P. J., & Holmes, S. (2014). Waste not, want not: why rarefying microbiome data is inadmissible. PLoS Comput Biol, 10(4), e1003531.
Robust methods for differential abundance analysis in marker gene surveys. JN Paulson, 2013.
PiCRUST

A note before we begin

There's a lot of mostly well-mannered disagreement over what are the "best" methods for analyzing 16S sequencing, especially when it comes to picking OTUs. I have found that the methods below are definitely not "noise-free", especially if open reference OTU picking is run on samples with high depth with many novel OTUs. Likely the best thing to do, particularly if you have the time, is to re-analyze the same data using different pipelines and compare the quality of the results. In particular, you may also be interested in the mothur MiSeq SOP and the DADA2 pipeline tutorial.

Generating Your Data

For the purpose of this tutorial, we'll be using a small dataset of 10 samples of 16S Illumina sequences from microbial communities inhabiting 3 different rock/soil environments: Luna (Calcite rock), Ignimbrite rock, and Soil (SAT) environments. All sequences from these samples have been combined into a single seqs.fna FASTA file for our analysis. If you want to follow along with the tutorial, you can download this git repo using the button on Github to do so, or by running git clone. Example output of all of the functions run in this tutorial are included in the tutorial_output folder.

Creating a mapping file

Before analyzing a set of samples, creating a mapping file is useful for the purpose of thinking about experimental design and hypothesis testing. The mapping file for QIIME includes information about your sequencing files and their associated metadata. It should be a tab-delimited text file - you can make it in Excel. The columns SampleID, BarcodeSequence, LinkerSequence, and Description are required for each sample. SampleIDs should refer to the sequence headers used in your FASTA files. You can add other columns of metadata as needed - Description should always be the last column. The mapping file for this example is saved as example_map.txt in this repository as a reference.

Picking Open Reference OTUs

The initial step we will perform in our analysis is OTU-picking. There are several OTU picking strategies in QIIME, and for almost all single-experiment analyses, it would be best to use open reference OTU picking. OTUs are Operating Taxonomic Units, clusters of sequences that are at least X% identical, where X is generally 97%. OTUs are not a perfect method of describing the data, but are a very widely used one. "Open reference" picking will use a database of known 16S genes to create OTU clusters while also allowing for the formation of OTUs which have sequences sufficiently different from the references.

Note: Why do we use open-reference picking here? See Stability of operational taxonomic units: an important but neglected property for analyzing microbial diversity. Also check out the QIIME page on OTU picking for cases in which you'd want to use closed reference OTU picking. I highly doubt that you'll be in a situation where you have to, which is mainly restricted to comparisons between difference sequencing regions.

This pipeline and its implementation in QIIME are definitely not controversy free - consider reading De novo clustering methods outperform reference-based methods for assigning 16S rRNA gene sequences to operational taxonomic units. and run a comparison of your data with the mothur average neighbor clustering algorithm.

You'll need to download the GreenGenes database of 16S sequences for this step, which is the database of reference 16S sequences we'll use to assign taxonomy. You'll need the file 97_otus.fasta, which functions as a FASTA file of all reference sequences with known taxonomy. Because as of September 2015 the latest GreenGenes is from 2013 (there may be an update soon), if you are interested in specific rare taxa discovered since 2013, you may want to add 16S sequences from those organisms to the 97_otus.fasta file manually.

To actually perform the OTU picking, you will need either usearch or vsearch. While usearch is widely used for OTU picking, it is closed source and a stand-in open source replacement for it known as vsearch has been developed.

It will be slightly easier to just use the original usearch as opposed to installing vsearch, which is what we will do here. Make sure usearch version 6.1.554 is installed in your path (moved to /usr/bin), by requesting a download from the link above and moving the executable to /usr/bin and renaming it usearch61. Another version may cause an error. You know you have installed usearch correctly when the command "usearch61" runs. If using vsearch, rename the vsearch executable as usearch61 in /usr/bin.

Note: A common mistake is to forget to run sudo chmod 777 /usr/bin/usearch and/or sudo chmod 777 /usr/bin/usearch61 before trying to run usearch for the first time.

Next, we need to create a basic params file for the OTU picking pipeline. There are a number of params that can be included (described here and here. In our working directory, create the file params.txt and edit it to look like:

pick_otus:enable_rev_strand_match       True

We are now ready to run the open reference OTU picking pipeline. The command to run the open reference OTU picking pipeline is below. Use $PWD - the QIIME notes claim you need to use absolute paths here .

pick_open_reference_otus.py -i $PWD/seqs.fna -r $PWD/97_otus.fasta -o $PWD/otu_output/ -s 0.1 -m usearch61 -p $PWD/params.txt

Explaining this command: -i seqs.fna is our sequences file, -r 97_otus.fasta is the reference OTU file from Greegenes, -o otu_output/ is our output directory, and -m usearch61 is our clustering algorithm (usearch).

This step has accomplished many things we used to do in QIIME with many steps in a single step: it has (1) picked our OTUs, (2) generated a representative sequence for each OTU, (3) assigned known taxonomy to those OTUs, (4) created a phylogenetic tree, and (5) created an OTU table. Let's now explore this output.

Note: I often find with high throughput, deeply sequence Illumina data, the QIIME open reference picking pipeline returns a very large number of OTUs mapped to similar taxa, many of which are singletons or otherwise low counts. By modifying the command above by adding --suppress_step4 you can cut down on the number of these taxa generated. You can also filter your OTU table to remove low-count samples with the command: filter_otus_from_otu_table.py -i otu_table.biom -o otu_table_no_singletons.biom -n 2 where -n describes the minimal number of counts allowed to accept an OTU (in this case, 2, so we eliminate only singletons. Consider increasing it if you have a large number of samples).

The OTU Table

The important output of the last command are two files, ./otu_output/rep_set.tre, ./otu_output/rep_set.fna, and ./otu_output/otu_table_mc2_w_tax.biom. The first is the phylogenetic tree describing the relationship of all of our sequences, the second is the list of representative sequences for each OTU (one sequence describing the most likely sequence for each OTU), and the third is our OTU table.

Now that we have clusters, abundances, and taxonomic labels for our sequencing data, so we can begin to interrogate it with statistical analysis.

What does this OTU table look like? It's currently in a binary format called .biom, and needs to be converted to text using the command:

biom convert -i ./otu_output/otu_table_mc2_w_tax.biom -o ./otu_table.txt --to-tsv --header-key taxonomy

You can then open otu_table.txt in your text editor of choice, and see the list of OTUs, their counts in each sample, and their assigned taxonomy, if any. Let's move the OTU table to our working directory with the command cp ./otu_output/otu_table_mc2_w_tax.biom ./otu_table.biom to begin working with it.

##Data Analysis

Summarize and plot taxonomy

The basic question we will answer: Proportionally, what microbes are found in each sample community?

We can begin our analysis by looking at the relative abundances of taxa per sample in the OTU table. It is useful to visualize relative abundance at specific taxonomic ranks for visual comparison and to obtain a basic overview of the members of the community. Briefly, let's see what the composition of our communities is at the phylum level. The level specified to passed to summarize_taxa.py (phylum is 2), and then some quick (hardly publication ready) plots are generated by plot_taxa_summary.py.

summarize_taxa.py -i otu_table.biom -L 2 -o ./phylum/

plot_taxa_summary.py -i phylum/otu_table_L2.txt -l phylum -c pie,bar,area -o phylum_charts/

Our output looks like:

We can immediately see the four soil samples have a drastically different composition than the rock samples.

Investigating alpha diversity

The basic question we will answer: How many species are in each sample?

Alpha diversity describes the diversity of species in a single sample or environment. A straightforward measure of alpha diversity in microbial ecology is the number of OTUs identified per sample, which is similar to a species richness metric. Other metrics used include shannon diversity (a measure of entropy), and chao1, a measure which predicts OTU richness at high depth of sequencing. We also will generate rarefaction plots, because alpha diversity increases with sequencing depth, and thus to compare alpha diversity between two or more samples which may have unequal sequence depth, we plot alpha diversity versus number of included sequences and compare the plotted curves. The chaos metric should estimate the theoretical asymptotic limit of the curve for OTU richness. To plot alpha rarefaction curves and calculate observed OTUs, shannon, and chao1 metrics, we can just run:

echo 'alpha_diversity:metrics observed_species,shannon,chao1' > parameters.txt
alpha_rarefaction.py -i otu_table.biom -o alpha_diversity/ -p ./parameters.txt -m ./example_map.txt

In our output, we have lists of the alpha metrics at increasing sequencing depths. The rarefaction plots visualize the alpha diversity by substrate:

Note: Rarefaction is a poor method for testing statistical hypotheses about differences in microbial diversity between samples. That is, if you're asking questions like Which microbes are significantly different between two sample groupings? or Do specific groups of samples differ in their microbial composition? (see below), do not use rarefied data - use the methods described in the sections below. The easiest explanation for why is that rarefying data artificially limits the sizes of your samples (by cutting off at the lowest shared sequencing depth), and therefore will needlessly limit the power of your statistical hypothesis testing. For more, see: Waste not, want not: why rarefying microbiome data is inadmissible.

Identifying differentially abundant OTUs

The basic question we will answer: Are there species significantly more abundant in one set of samples than in another?

Note: DESeq2 always takes a non-normalized, raw OTU table as input.

A major question you will be interested in answering is: Which microbes are significantly different between two sample groupings? These groupings could be different treatments or different environments, and understanding how they differ in terms of microbial composition in a statistically significant way is critical. To answer this question, we'll want to use DESeq2, (as implemented in this QIIME script), which is an R package that uses univariate tests to identify statistically significant features between two different groups. DESeq2 is a Bioconductor package in R, so to install it, you'll have to open up R (simply run the command "R" if it's installed), and run:

source("https://bioconductor.org/biocLite.R")
biocLite("DESeq2")

If that returns successfully, you can quit R, and now will be able to run the QIIME scripts which depend on DESeq2. For this example, let's see if there are any OTUs which are significantly more abundant in the rock environment samples than in the soil environment samples:

differential_abundance.py -i otu_table.biom -o diff_otus.txt -m example_map.txt -a DESeq2_nbinom -c Env -x Rock -y Soil -d

The -c parameter here determines the covariate variable you are comparing across, and -x and -y are the two categories you are comparing OTU counts between. The output file diff_otus.txt will have a list of differentially observed OTUs and their taxonomy, along with the log2-fold difference between the samples, p-values and (much more importantly) multiple hypothesis corrected p-values for each differentially observed feature. In this case, if we look at the start of the data, we can see that members of the Halobacteria are significantly more abundant in the soil samples than in the rock samples.

OTU	baseMean	log2FoldChange	lfcSE	stat	pvalue	padj	taxonomy
New.CleanUp.ReferenceOTU1	344.264896992611	-7.56413295150909	0.896632640419114	-8.43615613633403	3.27944626692551e-17	8.6249436820141e-15	k__Archaea; p__Euryarchaeota; c__Halobacteria; o__Halobacteriales; f__Halobacteriaceae; g__; s__
1106797	375.62436208403	-7.52492047816268	0.918347169604749	-8.19398232740386	2.52722187085528e-16	3.3232967601747e-14	k__Archaea; p__Euryarchaeota; c__Halobacteria; o__Halobacteriales; f__Halobacteriaceae; g__Haloterrigena; s__
New.CleanUp.ReferenceOTU21	123.485073162181	-6.52374730020925	0.873690031326847	-7.46688993383824	8.21123947029121e-14	7.19851993562196e-12	k__Archaea; p__Euryarchaeota; c__Halobacteria; o__Halobacteriales; f__Halobacteriaceae; g__Haloterrigena; s__
3862609	86.8415956377759	-6.1805885862336	0.857896613133417	-7.20435130715735	5.83208253243469e-13	3.83459426507581e-11	k__Archaea; p__Euryarchaeota; c__Halobacteria; o__Halobacteriales; f__Halobacteriaceae; g__Halobacteriaceae; NA

Normalizing the OTU Table

As mentioned, an important confounding factor that must be considered when analyzing microbial data is that library sizes across an experiment are likely to be of uneven sequencing depths - in other words, each sample will have a different number of sequences, and this can vary widely between samples. Spurious correlations and inaccurate clustering in beta diversity analyses, that can often appear deceptively related to covariates of interest, can actually have been caused by a bias in library sizes between two treatments or groupings. A traditional means of dealing with this in the QIIME community was to cut off library sizes at a minimum shared sequence count, called rarefaction. However, rarefaction unnecessarily throws away usable data by throwing away sequences, and is therefore not recommended for differential abundance and beta diversity analyses. Instead, we can normalize the OTU table, and will use the CSS normalization from Robust methods for differential abundance analysis in marker gene surveys:

normalize_table.py -i otu_table.biom -a CSS -o CSS_normalized_otu_table.biom

Beta-diversity and PCoA

The basic question we will answer: How much does diversity change between samples?

Beta diversity is a metric of diversity that describes how different the species composition of different habitats is. Beta diversity therefore tells us important information about how different every sample is from all of the rest, and whether any grouping of samples are more similar in composition than the average. How do we measure the difference between 2 samples? There are mathematical and phylogenetic metrics which can be used. The full list is:

Known metrics are: abund_jaccard, binary_chisq, binary_chord, binary_euclidean, binary_hamming, binary_jaccard, binary_lennon, binary_ochiai, binary_otu_gain, binary_pearson, binary_sorensen_dice, bray_curtis, bray_curtis_faith, bray_curtis_magurran, canberra, chisq, chord, euclidean, gower, hellinger, kulczynski, manhattan, morisita_horn, pearson, soergel, spearman_approx, specprof, unifrac, unifrac_g, unifrac_g_full_tree, unweighted_unifrac, unweighted_unifrac_full_tree, weighted_normalized_unifrac, weighted_unifrac

Two commonly used metrics are bray_curtis and unweighted_unifrac, the latter of which is a phylogenetic distance.

beta_diversity.py -i CSS_normalized_otu_table.biom -m bray_curtis,unweighted_unifrac -t ./otu_output/rep_set.tre -o beta_div

The output of this command is a distance matrix with a value which essentially is the metric difference between every pair of samples. We can visualize this data in a Principle Coordinate plot (PCoA):

principal_coordinates.py -i ./beta_div/bray_curtis_CSS_normalized_otu_table.txt -o ./beta_div_coords.txt

And produce a plot of the PCoA:

make_2d_plots.py -i beta_div_coords.txt -m example_map.txt

The resulting PCoA plot is shown below, and indicates that samples clearly cluster by substrate type and substrates differ substantially in beta diversity.

Comparing Categories

The basic question we will answer: Do different sample groupings significantly differ in their microbial composition?

In our experimental setup, we have three different substrates: calcite, ignimbrite, and soil samples. We've seen good observational evidence above that these have unique microbial compositions from each other - now we can generate statistical support for that assertion. There are many statistical tests to test this sort of hypothesis, as explained on this page. We will use two, one called adonis and one called ANOSIM. The input for these tests are the beta diversity distance matrices we created above - here we will analyze the bray curtis distance matrix as opposed to the unifrac one.

compare_categories.py --method anosim -i ./beta_div/bray_curtis_CSS_normalized_otu_table.txt -m example_map.txt -c Substrate -o anosim_out

Our output looks like:

method name	ANOSIM
test statistic name	R
sample size	10
number of groups	3
test statistic	1.0
p-value	0.001

In other words, our substrates do differ significantly from each other in terms of microbial composition (p = 0.001). Now, running the adonis test:

compare_categories.py --method adonis -i ./beta_div/bray_curtis_CSS_normalized_otu_table.txt -m example_map.txt -c Substrate -o adonis_out

And our output looks like:

                                Df SumsOfSqs MeanSqs F.Model    R2 Pr(>F)   
qiime.data$map[[opts$category]]  2    2.4986 1.24929  10.119 0.743  0.002 **
Residuals                        7    0.8642 0.12346         0.257          
Total                            9    3.3628                 1.000

In other words, our substrates explain the microbial composition data with an F-statistic of 10, an R^2 value of 0.743, and a p-value of 0.002.

Note: Adonis tests can also be run on continuous variables to see if a continuous variable is significantly correlated with differences in microbial composition: try -c pH on the example dataset.

For more on ANOSIM, you might want to check out:

Chapman, M. G., & Underwood, A. J. (1999). Ecological patterns in multivariate assemblages: information and interpretation of negative values in ANOSIM tests. Marine ecology. Progress series, 180, 257-265.

Correlating OTUs with Continuous Variables

The basic question we will answer: Which species abundances are significantly correlated with an environmental variable?

In the previous section, we used statistical tests for comparing differences in microbial composition across sample groupings. In this section, we will use statistical tests to determine whether specific OTUs are correlated with continuous environmental variables. Continuous variables in your experiment could be anything from pH to humidity to disease severity, depending on the environment in which you are studying. In our experiment, we will see if the (made up) pH of each sample is positively or negatively correlated with the presence of any specific microbial species by calculating Pearson scores and use bootrapping to calculate p-values for a null-comparison test.

observation_metadata_correlation.py -i ./CSS_normalized_otu_table.biom -m example_map.txt -c pH -s pearson --pval_assignment_method bootstrapped --permutations 100 -o pearson_pH.txt

Our output looks like:

Feature ID	Test stat.	pval	pval_fdr	pval_bon	taxonomy
815453	0.860573043798	0.0	0.0	0.0	k__Archaea; p__Euryarchaeota; c__Halobacteria; o__Halobacteriales; f__Halobacteriaceae; NA; NA
4373812	0.861651223521	0.0	0.0	0.0	k__Archaea; p__Euryarchaeota; c__Halobacteria; o__Halobacteriales; f__Halobacteriaceae; g__Natronomonas; s__
562741	-0.742907153289	0.0	0.0	0.0	k__Bacteria; p__Actinobacteria; c__Rubrobacteria; o__Rubrobacterales; f__Rubrobacteraceae; g__Rubrobacter; s__

The output is a list of significantly correlational OTUs, the Pearson score for how strongly correlated the OTU abundances are with the continuous variable, calculated p-values, and a multiple hypothesis adjusted p-value (pval_bon, also pval_fdr). In these first few lines, we can see that the Halobacteria are strongly positively associated with pH, while the Rubrobacter are strongly negatively associated with pH. For a detailed description of the output and other possible correlational tests you could run, see the linked page for the observation_metadata.py script above in this section.

Comparing Environmental Distances

The basic question we will answer: Do environmental differences between samples correlate with microbial composition?

In some experimental designs, you will have environmental variables best expressed in terms of differences between samples, rather than absolute values. For example, you might have geographic distances between samples, and may want to test whether geographic differences correlate significantly with changes in microbial composition. This case can be framed as a comparison between distance matrices - we have our first distance matrix (all sample:sample comparisons for the environmental variable of interest) and the second distance matrix (all sample:sample comparisons for microbial composition using bray curtis), and we want to determine whether or not they are significantly correlated. To approach this problem from a hypothesis testing perspective, we would use the Mantel test as implemented in QIIME.

Our experimental design does not have a variable to test this on, but the general analysis would be run like:

compare_distance_matrices.py --method mantel -i ./beta_div/bray_curtis_CSS_normalized_otu_table.txt,./your_env_matrix.txt -o mantel_out -n 999

Where your_env_matrix.txt would be the filename of a generated distance matrix on your variable of interest.

Note: If you need to generate a distance matrix from a continuous variable, you might want to use the useful script distance_matrix_from_mapping.py.

Networks of Microbes and Samples

The basic question we will answer: How often are species found together, and in which samples are they found?

A network based analysis can offer us a powerful visualization of how different microbes "move together" across samples, and allow us to visually identify microbes that are often found in the same samples, and which samples they're found in. This information can hint at profound ecological relationships and metabolic cooperations within the communities we are studying. We can use a QIIME script to make a network which visualizes both samples and OTUs by creating edges between shared OTUs and samples, and color samples by Substrate and OTUs by their phyla:

make_bipartite_network.py -i CSS_normalized_otu_table.biom -m example_map.txt -k taxonomy --md_fields 'k,p,c,o,f' -o bipartite_network/ --scolors 'Substrate' --ocolors 'p' --osize 'Abundance'

The output can be visualized in Cytoscape, as done so below. Each large square is a sample (Pink: Ignimbrite, Purple: Calcite, Cyan: Soil), and each small square is an OTU. Cyanobacteria were colored green, and Actinobacteria were colored red, and Archaea were colored orange - here we can see that in the rock environments, there is a coexistence of phototroph and heterotroph, while the soil samples are overwhelmingly dominated by the Archaea. Note that obviously this is only a cursory and highly simplistic example of the sort of information this analysis can provide.

Where to go next

To further analyze your data, you might want to consider importing your data into the Phyloseq R package. R offers a consistent environment which supports a large number of independent existing statistical tests, analyses (including Machine Learning), and publication quality graphics engines such as ggplot2. There is an existing tutorial for phyloseq located here.

Additionally, most 16S analyses would not be complete without also analyzing predicted functional content, which can be done with PICRUSt.

License

alexcritschristoph/Qiime16sTutorial

ErrorLooks like something went wrong!

About

Topics

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages