Skip to content

YinLiLin/CMplot

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 

Repository files navigation

CMplot

GitHub issues CRAN Version

A high-quality drawing tool designed for Manhattan plot of genomic analysis

🧰 Relevant software tools for genetic analyses and genomic breeding

📫 HIBLUP: Versatile and easy-to-use GS toolbox. 🍀 SIMER: data simulation for life science and breeding.
🚴‍♂️ KAML: Advanced GS method for complex traits. 🏔️ IAnimal: an omics knowledgebase for animals.
🏊 hibayes: A Bayesian-based GWAS and GS tool. 📮 rMVP: Efficient and easy-to-use GWAS tool.

Installation

CMplot is available on CRAN, so it can be installed with the following R code:

> install.packages("CMplot")
> library("CMplot")

# if you want to use the latest version on GitHub:
> source("https://raw.githubusercontent.com/YinLiLin/CMplot/master/R/CMplot.r")

There are two example datasets attached in CMplot, users can export and view the details by following R code:

> data(pig60K)   #calculated p-values by MLM
> data(cattle50K)   #calculated SNP effects by rrblup
> head(pig60K)

          SNP Chromosome Position    trait1     trait2     trait3
1 ALGA0000009          1    52297 0.7738187 0.51194318 0.51194318
2 ALGA0000014          1    79763 0.7738187 0.51194318 0.51194318
3 ALGA0000021          1   209568 0.7583016 0.98405289 0.98405289
4 ALGA0000022          1   292758 0.7200305 0.48887140 0.48887140
5 ALGA0000046          1   747831 0.9736840 0.22096836 0.22096836
6 ALGA0000047          1   761957 0.9174565 0.05753712 0.05753712

> head(cattle50K)

   SNP chr    pos Somatic cell score  Milk yield Fat percentage
1 SNP1   1  59082        0.000244361 0.000484255    0.001379210
2 SNP2   1 118164        0.000532272 0.000039800    0.000598951
3 SNP3   1 177246        0.001633058 0.000311645    0.000279427
4 SNP4   1 236328        0.001412865 0.000909370    0.001040161
5 SNP5   1 295410        0.000090700 0.002202973    0.000351394
6 SNP6   1 354493        0.000110681 0.000342628    0.000105792

As the example datasets, the first three columns are names, chromosome, position of SNPs respectively, the rest of columns are the pvalues of GWAS or effects of GS/GP for traits, the number of traits is unlimited. Note: if plotting SNP_Density, only the first three columns are needed.

Now CMplot could handle not only Genome-wide association study results, but also SNP effects, Fst, tajima's D and so on.


Total 50~ parameters are available in CMplot, typing ?CMplot can get the detail function of all parameters.


Citation

CMplot has been integrated into our developed GWAS package rMVP, please cite the following paper:
Yin, L. et al. rMVP: A Memory-efficient, Visualization-enhanced, and Parallel-accelerated tool for Genome-Wide Association Study, Genomics, Proteomics & Bioinformatics (2021), doi: 10.1016/j.gpb.2020.10.007.


SNP-density plot

> CMplot(pig60K,plot.type="d",bin.size=1e6,chr.den.col=c("darkgreen", "yellow", "red"),file="jpg",file.name="",dpi=300,
    main="illumilla_60K",file.output=TRUE,verbose=TRUE,width=9,height=6)
# set the window size: bin.size=1e6
# set the legend breaks by: bin.breaks=seq(min, max, step), e.g., bin.breaks=seq(0, 50, 10), the windows out of the breaks will be plotted in the same color as min or max.
# get the detailed information of all windows: "windinfo <- CMplot(pig60K, plot.type="d", ...)"
# file: the format of the output file, if file="png", CMplot will output a transparent background file 
# file.name: specify the output file name, the default is corresponding column name when setting file.name=""
# chr.labels: change the chromosome names
# main: change the title of the plots
# NOTE: to show the full length of each chromosome, users can manually add every chromosome with one SNP, whose
# position equals to the length of corresponding chromosome, then specify the parameter: CMplot(..., chr.pos.max=TRUE).


Circular-Manhattan plot

(1) Genome-wide association study(GWAS)

> CMplot(pig60K,type="p",plot.type="c",chr.labels=paste("Chr",c(1:18,"X","Y"),sep=""),r=0.4,cir.axis=TRUE,
        outward=FALSE,cir.axis.col="black",cir.chr.h=1.3,chr.den.col="black",file="jpg",
        file.name="",dpi=300,file.output=TRUE,verbose=TRUE,width=10,height=10)
# to remove the grid line in circles, add parameter cir.axis.grid=FALSE
# file.name: specify the output file name, the default is corresponding column name

> CMplot(pig60K,type="p",plot.type="c",r=0.4,col=c("grey30","grey60"),chr.labels=paste("Chr",c(1:18,"X","Y"),sep=""),
      threshold=c(1e-6,1e-4),cir.chr.h=1.5,amplify=TRUE,threshold.lty=c(1,2),threshold.col=c("red",
      "blue"),signal.line=1,signal.col=c("red","green"),chr.den.col=c("darkgreen","yellow","red"),
      bin.size=1e6,outward=FALSE,file="jpg",file.name="",dpi=300,file.output=TRUE,verbose=TRUE,width=10,height=10)

#Note:
1. if signal.line=NULL, the lines that crosse circles won't be added.
2. if the length of parameter 'chr.den.col' is not equal to 1, SNP density that counts 
   the number of SNP within given size('bin.size') will be plotted around the circle.

(2) Genomic Selection/Prediction(GS/GP)

> CMplot(cattle50K,type="p",plot.type="c",LOG10=FALSE,outward=TRUE,col=matrix(c("#4DAF4A",NA,NA,"dodgerblue4",
         "deepskyblue",NA,"dodgerblue1", "olivedrab3", "darkgoldenrod1"), nrow=3, byrow=TRUE),
         chr.labels=paste("Chr",c(1:29),sep=""),threshold=NULL,r=1.2,cir.chr.h=1.5,axis.cex=1,
         cir.band=1,file="jpg", file.name="",dpi=300,chr.den.col="black",file.output=TRUE,verbose=TRUE,
         width=10,height=10)
        
# parameter 'col' can be either vector or matrix, if a matrix, each trait can be plotted in different colors.
# file.name: specify the output file name, the default is corresponding column name when setting ' file.name="" '


Rectangular-Manhattan plot

Genome-wide association study(GWAS)

> CMplot(pig60K,type="p",plot.type="m",LOG10=TRUE,threshold=NULL,file="jpg",file.name="",dpi=300,
    file.output=TRUE,verbose=TRUE,width=14,height=6,chr.labels.angle=45)
# 'chr.labels.angle': adjust the angle of labels of x-axis (-90 < chr.labels.angle < 90).
# file.name: specify the output file name, the default is corresponding column name when setting ' file.name="" '.

Amplify signals on pch, cex and col

> CMplot(pig60K, plot.type="m", col=c("grey30","grey60"), LOG10=TRUE, ylim=c(2,12), threshold=c(1e-6,1e-4),
        threshold.lty=c(1,2), threshold.lwd=c(1,1), threshold.col=c("black","grey"), amplify=TRUE,
        chr.den.col=NULL, signal.col=c("red","green"), signal.cex=c(1.5,1.5),signal.pch=c(19,19),
        file="jpg",file.name="",dpi=300,file.output=TRUE,verbose=TRUE,width=14,height=6)

#Note: if the ylim is setted, then CMplot will only plot the points among this interval,
#       ylim can be vector or list, if it is a list, different traits can be assigned with
#       different range at y-axis.
#      'threshold' can be set for different traits, for example: threshold=list(c(1e-6,1e-4), NULL, 1e-5),
#       each list contains a vector of thresholds for each trait, NULL means no threshold for corresponding trait. 

Attach chromosome density on the bottom of Manhattan plot

> CMplot(pig60K, plot.type="m", LOG10=TRUE, ylim=NULL, threshold=c(1e-6,1e-4),threshold.lty=c(1,2),
        threshold.lwd=c(1,1), threshold.col=c("black","grey"), amplify=TRUE,bin.size=1e6,
        chr.den.col=c("darkgreen", "yellow", "red"),signal.col=c("red","green"),signal.cex=c(1.5,1.5),
        signal.pch=c(19,19),file="jpg",file.name="",dpi=300,file.output=TRUE,verbose=TRUE,
        width=14,height=6)

# Note: if the length of parameter 'chr.den.col' is bigger than 1, SNP density that counts
#       the number of SNP within given size('bin.size') will be plotted. 
# file.name: specify the output file name, the default is corresponding column name when setting file.name=""

Highlight a group of SNPs on pch, cex, type, and col

> signal <- pig60K$Position[which.min(pig60K$trait2)]
> SNPs <- pig60K$SNP[pig60K$Chromosome==13 & 
        pig60K$Position<(signal+1000000)&pig60K$Position>(signal-1000000)]
> CMplot(pig60K, plot.type="m",LOG10=TRUE,col=c("grey30","grey60"),highlight=SNPs,
        highlight.col="green",highlight.cex=1,highlight.pch=19,file="jpg",file.name="",
        chr.border=TRUE,dpi=300,file.output=TRUE,verbose=TRUE,width=14,height=6)
# Note:
# 'highlight' could be vector or list, if it is a vector, all traits will use the same highlighted SNPs index, 
# if it is a list, the length of the list should equal to the number of traits.
# highlight.col, highlight.cex, highlight.pch can be value or vector, if its length equals to the length of highlighted SNPs,
# each SNPs have its special colour, size and shape.

> SNPs <-  pig60K[pig60K$trait2 < 1e-4, 1]
> CMplot(pig60K,type="h",plot.type="m",LOG10=TRUE,highlight=SNPs,highlight.type="p",
        highlight.col=NULL,highlight.cex=1.2,highlight.pch=19,file="jpg",file.name="",
        dpi=300,file.output=TRUE,verbose=TRUE,width=14,height=6,band=0.6)

> SNPs <-  pig60K[pig60K$trait2 < 1e-4, 1]
> CMplot(pig60K,type="p",plot.type="m",LOG10=TRUE,highlight=SNPs,highlight.type="h",
        col=c("grey30","grey60"),highlight.col="darkgreen",highlight.cex=1.2,highlight.pch=19,
        file="jpg",dpi=300,file.output=TRUE,verbose=TRUE,width=14,height=6)

> SNPs <-  pig60K[
	pig60K$trait1 < 1e-4 |
	pig60K$trait2 < 1e-4 |
	pig60K$trait3 < 1e-4, 1]
> CMplot(pig60K,type="p",plot.type="m",LOG10=TRUE,highlight=SNPs,highlight.type="l",
        threshold=1e-4,threshold.col="black",threshold.lty=1,col=c("grey60","#4197d8"),
        signal.cex=1.2, signal.col="red", highlight.col="grey",highlight.cex=0.7,
        file="jpg",dpi=300,file.output=TRUE,verbose=TRUE,multracks=TRUE)

Visualize only one chromosome

> CMplot(pig60K[pig60K$Chromosome==13, ], plot.type="m",LOG10=TRUE,col=c("grey60"),highlight=SNPs,
        highlight.col="green",highlight.cex=1,highlight.pch=19,file="jpg",file.name="", 
        threshold=c(1e-6,1e-4),threshold.lty=c(1,2),threshold.lwd=c(1,2), width=9,height=6,
        threshold.col=c("red","blue"),amplify=FALSE,dpi=300,file.output=TRUE,verbose=TRUE)

add genes or SNP names around the highlighted SNPs

> SNPs <- pig60K[pig60K[,5] < (0.05 / nrow(pig60K)), 1]
> genes <- paste("GENE", 1:length(SNPs), sep="_")
> set.seed(666666)
> CMplot(pig60K[,c(1:3,5)], plot.type="m",LOG10=TRUE,col=c("grey30","grey60"),highlight=SNPs,
        highlight.col=rep(c("green","blue"),length=length(SNPs)),highlight.cex=1, highlight.text=genes,      
        highlight.text.col=rep("red",length(SNPs)),threshold=0.05/nrow(pig60K),threshold.lty=2,   
        amplify=FALSE,file="jpg",file.name="",dpi=300,file.output=TRUE,verbose=TRUE,width=14,height=6)
# Note:
# 'highlight', 'highlight.text' could be vector or list, if it is a vector, all traits will 
# use the same highlighted SNPs index and text, if it is a list, the length of the list should equal to the number of traits.
# the order of 'highlight.text' must be consistent with 'highlight'
# highlight.text.cex: value or vecter, control the size of added text
# highlight.text.font: value or vecter, control the font of added text

Genomic Selection/Prediction(GS/GP) or other none p-values

> CMplot(cattle50K, plot.type="m", band=0.5, LOG10=FALSE, ylab="SNP effect",threshold=0.015,
        threshold.lty=2, threshold.lwd=1, threshold.col="red", amplify=TRUE, width=14,height=6,
        signal.col=NULL, chr.den.col=NULL, file="jpg",file.name="",dpi=300,file.output=TRUE,
        verbose=TRUE,cex=0.8)
#Note: if signal.col=NULL, the significant SNPs will be plotted with original colors.

> cattle50K[,4:ncol(cattle50K)] <- apply(cattle50K[,4:ncol(cattle50K)], 2, 
         function(x) x*sample(c(1,-1), length(x), rep=TRUE))
> CMplot(cattle50K, type="h",plot.type="m", band=0.5, LOG10=FALSE, ylab="SNP effect",ylim=c(-0.02,0.02),
        threshold.lty=2, threshold.lwd=1, threshold.col="red", amplify=FALSE,cex=0.6,
        chr.den.col=NULL, file="jpg",file.name="",dpi=300,file.output=TRUE,verbose=TRUE)
#Note: Positive and negative values are acceptable.

Multiple tracks Rectangular-Manhattan plot

> SNPs <- list(
	pig60K$SNP[pig60K$trait1<1e-6],
	pig60K$SNP[pig60K$trait2<1e-6],
	pig60K$SNP[pig60K$trait3<1e-6]
)
> CMplot(pig60K, plot.type="m",multracks=TRUE,threshold=c(1e-6,1e-4),threshold.lty=c(1,2), 
        threshold.lwd=c(1,1), threshold.col=c("black","grey"), amplify=TRUE, signal.col=
        c("red","green"), signal.cex=1, file="jpg",file.name="",dpi=300,file.output=TRUE,
        verbose=TRUE, highlight=SNPs, highlight.text=SNPs, highlight.text.cex=1.4)
#Note: if you are not supposed to change the color of signal, 
#      please set signal.col=NULL and highlight.col=NULL.

Multiple traits Rectangular-Manhattan plot

> CMplot(pig60K, plot.type="m",multraits=TRUE,threshold=c(1e-6,1e-4),threshold.lty=c(1,2), 
        threshold.lwd=c(1,1), threshold.col=c("black","grey"), amplify=TRUE,bin.size=1e6,
        chr.den.col=c("darkgreen", "yellow", "red"), signal.col=c("red","green"),
        signal.cex=1, file="jpg",file.name="",dpi=300,file.output=TRUE,verbose=TRUE,
        points.alpha=100,legend.ncol=1, legend.pos="left")

>CMplot(pig60K, plot.type="m",col="grey",multraits=TRUE,threshold=1e-4,threshold.lty=1, 
        threshold.lwd=c(1,1), threshold.col=c("black","grey"),amplify=TRUE,
        chr.den.col=NULL, signal.col=c("red","green","blue"),signal.cex=1, 
        file="jpg",file.name="",dpi=300,file.output=TRUE,verbose=TRUE,
        points.alpha=225,legend.ncol=3, legend.pos="middle")
# note: length of 'col' should be equal to 1 for this case.

---

Q-Q plot

> CMplot(pig60K,plot.type="q",box=FALSE,file="jpg",file.name="",dpi=300,
    conf.int=TRUE,conf.int.col=NULL,threshold.col="red",threshold.lty=2,
    file.output=TRUE,verbose=TRUE,width=5,height=5)

Multiple tracks Q-Q plot

> pig60K$trait1[sample(1:nrow(pig60K), round(nrow(pig60K)*0.80))] <- NA
> pig60K$trait2[sample(1:nrow(pig60K), round(nrow(pig60K)*0.25))] <- NA
> CMplot(pig60K,plot.type="q",col=c("dodgerblue1", "olivedrab3", "darkgoldenrod1"),multracks=TRUE,
        threshold=1e-6,ylab.pos=2,signal.pch=c(19,6,4),signal.cex=1.2,signal.col="red",
        conf.int=TRUE,box=FALSE,axis.cex=2,file="jpg",file.name="",dpi=300,file.output=TRUE,
        verbose=TRUE,ylim=c(0,8),width=5,height=5)

Multiple traits Q-Q plot

> CMplot(pig60K,plot.type="q",col=c("dodgerblue1", "olivedrab3", "darkgoldenrod1"),multraits=TRUE,
        threshold=1e-6,ylab.pos=2,signal.pch=c(19,6,4),signal.cex=1.2,signal.col="red",
        conf.int=TRUE,box=FALSE,axis.cex=1,file="jpg",file.name="",dpi=300,file.output=TRUE,
        verbose=TRUE,ylim=c(0,8),width=5,height=5)


Contact

Questions, suggestions, and bug reports are welcome and appreciated.

About

📊 Circular and Rectangular Manhattan Plot

Topics

Resources

Stars

Watchers

Forks

Languages