Points.js

A pointer events polyfill, allowing you to listen to the following events as described in the W3C Pointer Events Specification proposal:

pointerdown
pointerup
pointermove
pointerover
pointerout
pointerenter
pointerleave
pointercancel

The idea is to abstract away the differences between mouse and touch (and pen) events, to reduce the developer effort required to support multiple input types. Currently, without a polyfill, only IE10 supports these events (in prefixed form), but it looks as though they will gain wider adoption.

Usage

Include Points.js somewhere on your page
Add a CSS touch-action property of none to elements you want to receive pointer events (not actually necessary – see the section on touch-action below – but recommended)
That's it.

What's wrong with the existing polyfills?

There's already a few (or more? let me know!) pointer events polyfills out there:

However as far as I can tell, they don't quite adhere to the spec, especially with touch devices. (Currently, neither does this one, but in different ways - see next section!). Hand.js double-fires events because it 'translates' both touch events and the compatibility mouse events that mobile browsers fire after those touch events, and the other two don't fire pointerenter and pointerleave events.

All three fail to fire pointermove events on an element (or pointerover/out/enter/leave events) in a touch context if the initial pointerdown occurred outside that element.

This isn't to disparage these polyfills - merely to explain why I've bothered to create a new one. There are almost certainly things that they've got right and I've got wrong. Hopefully, between us, we can get it completely right.

Limitations

Disregards the touch-action CSS property. This is nigh on impossible to implement well across browsers without introducing performance penalties. For now, just use event.preventDefault() like you're used to (see the section on touch-action below), but use the CSS property to be future-proof.
Properties such as tiltX, tiltY and pressure are incorrect. tiltX and tiltY are both 0, pressure is 0.5 (0 for mouse pointer with no buttons down), unless you are in Firefox and using a device that reports mozPressure. width and height are 20 for touch events - a reasonable estimate of how fat people's fingers are.
No support for gotpointercapture and lostpointercapture yet.
pointerdown and pointerup events are fired whenever a mouse button is pressed or released - strictly speaking, they should only be fired when the mouse enters or leaves the 'active buttons state', i.e. if a second button is pressed, it shouldn't trigger a second pointerdown event.

Performance

This polyfill works slightly differently to the others - whereas they generally work by intercepting calls to addEventListener, this one works by listening to intercepting mouse and touch events at the window level, and firing the corresponding pointer events on the intended target.

In the case of touch events the intended target may not be the same as the touch target, because the target of a touch is whatever was under the finger when you first put it on the screen, not what's under it now, which is at odds with the pointer events spec. The only way to discover the intended target is with document.elementFromPoint( touch.clientX, touch.clientY ), so that's what we do.

This approach allows us to adhere to the spec more closely than polyfills that use the interception approach. There is a theoretical performance implication that you should be aware of - generating fake events and using document.elementFromPoint is not free, though in practice the impact is negligible.

However there is another performance consideration. Ordinarily, on touch devices, the document will begin to scroll as soon as your finger drags the surface - this happens on a separate thread to the main JavaScript thread, which makes it snappy and responsive even if a lot of stuff is going on.

Unless, that is, the element under your finger (or one of its ancestors) has one or more touch event handlers bound to it, in which case the browser cannot begin scrolling until it has determined whether any of those handlers call preventDefault() on the event.

With Points.js, because window (ancestor to all elements, as far as the event model is concerned) has touch event handlers bound, the browser cannot implement scrolling on a separate thread. The upshot is that if there are scrollable areas in your app, scrolling performance will be affected, depending on how much work the main JavaScript thread has to do.

Rick Byers has a more detailed explanation here.

The touch-action CSS property

tl:dr; - touch-action doesn't work, use event.preventDefault() alongside touch-action: none for the time being

As well as the new events, the spec introduces touch-action, a CSS property which can have a value of auto (default), none, pan-x or pan-y. The idea, according to Microsoft's Jacob Rossi (see this W3Conf video around the 12:50 mark) is to eliminate the need for event.preventDefault(), which necessarily introduces lag between the action (dragging a finger) and the behaviour (panning the document) because the browser has to wait to see if any event handlers prevented the default behaviour.

This introduces a couple of problems for polyfillers. Firstly, invalid CSS properties are disregarded, so the only way we can establish whether the author included touch-action: none is by requesting and parsing stylesheets ourselves. Hand.js does so when the document first loads, parsing with regex and adding a handjs_forcePreventDefault property to all elements matching selectors to which touch-action: none is applied, but its approach will fail if:

The stylesheets are on a different domain, without a valid CORS setup
There are conflicting rules which need to be interpreted - there is no mechanism for comparing selector specificity
Per-element styles are used
Stylesheets are added after DOMContentLoaded
The DOM changes in certain ways (e.g. toggling between active and inactive in the following case: canvas.active { touch-action: none; } canvas.inactive { touch-action: auto })

Polymer's polyfill acknowledges these difficulties and proposes an alternative, namely adding a touch-action="none" attribute to nodes that should receive pointer events and using mutation observers where possible to keep track of changes. This is a smart idea, but I'm not sure I like adding a non-standard property to compensate for the lack of a standard property.

Furthermore there is some ambiguity in how touch-action is interpreted:

Hand.js fires pointer events whether touch-action is auto or none (it ignores pan-x and pan-y), but prevents the default event in the none case
Polymer does not fire events when touch-action is auto, otherwise it fires events and prevents event defaults. It respects the pan-x and pan-y values. This is potentially problematic since you may want to respond to the user tapping on elements without preventing panning/zooming when the user initially touches that element then subsequently drags their finger.
Pointer.js disregards touch-action altogether.

None of these solutions accurately reflect the specification, which (if I'm reading it correctly - it's not the clearest piece of English ever written!) allows user agents to initially dispatch pointer events regardless of touch-action but then stop dispatching pointer events (after dispatching a pointercancel event) if the user agent determines it should execute a default behaviour. Unfortunately, we have no good way of determining whether a default behaviour has been initiated.

Faced with imperfect solutions, I present... no solution. If you want to prevent default behaviour (panning and zooming) on an element, add an event handler and use event.preventDefault(), the same way you would with touch events normally. You should still use touch-action: none, since future browsers may not fire expected pointer events otherwise, depending on how they interpret the spec...

(If anyone has any better ideas, let me know!)

Questions for the W3C Pointer Events Working Group!

Update: Responses from Rick Byers, who works on the Chrome team and is part of the working group, below

Can touch-action: auto override a touch-action: none property applied to an ancestor? Should pointer events fire at all in a touch-action: pan-x situation, or should they only not fire if the user is in fact panning horizontally?
- touch-action isn't inherited, so it's not necessary. A child automatically gets touch-action: auto behavior for itself.
- Pointer events should always fire up until the point a browser action starts (at which point you should get a pointercancel event. So for pan-x, I'd expect to see pointerdown when the finger touches, some number of pointermove events, then if the user moves far enough in the x direction to trigger a pan, a pointer-cancel. Instead if the user moves in another direction I'd get all pointer events (and no panning).
It's not at all clear how you're supposed to listen to button changes. The spec says 'Pointer Events do not fire overlapping pointerdown and pointerup events for chorded button presses ... Instead, chorded button presses can be detected by inspecting changes to the button and buttons properties'. Inspect how?
- The spec says that pointermove must be fired when the button state changes, so that's where you can detect a change.

Browser support

Doesn't work in very old browsers (IE8 and below, possibly some early versions of Firefox that no-one uses any more, probably the browser on your Nintendo Wii or your 2007 featurephone). Pull requests welcome!

In the case of IE8 it would probably be fixable - you'd need to polyfill addEventListener and dispatchEvent in such a way that non-native events are accommodated - most polyfills only support native events like onmouseover. The corollary of this is that you'd need to maintain some kind of registry for custom event handlers. If you're having IE problems I feel bad for you son...

Contact

I'm @rich_harris.

Changelog

is here.

License

Copyright 2013 Rich Harris. Released under the MIT License.

Rich-Harris/Points

ErrorLooks like something went wrong!

About

Resources

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Uh oh!

Languages

Error
Looks like something went wrong!

Packages